Do I need a garage?

YES.... Window film can NOT be properly installed outside. A garage is needed for protection from direct sunlight and most importantly wind. It also is required to be able to open all of the doors all the way. Window film is installed on the inside of the windows which causes the doors to be pushed all the way open during the install process. Enough room is required to that no damage is caused to the vehicle itself or other property in the garage. If no garage is available we have a shop available for drop off only.

​

What areas do you service?

Sunrise Window Tint services Portland Metro and surrounding areas (Vancouver, Beaverton, Gresham, Fairview, Happy Valley, Troutdale). If you happen to live in a different area, please reach out to confirm!

​

How Long Does It Take?

The process generally takes 2 to 5 hours depending on the difficulty of the car, cleanliness and the number of windows. Window tinting is not a race, but with our experience we are able to offer very high quality installations in a short period of time.

 

What do I use to clean my tinted windows?

We recommend using a soft cloth and Invisible Glass, or a foam glass cleaner available in grocery and auto parts stores. Never use an ammonia based window cleaner which can wear away at the films adhesive.

 

Why do I see little bubbles or patchiness soon after installation?

This is very normal. We use a lot of water to activate the adhesive and to allow us to move the film around and position it for a perfect installation. Although we squeegee out as much of the water as possible, some small amount remains between the glass and the film. As this water evaporates through the film you may see some little water pockets or foggy patches. These should go away within a few weeks or so depending on the weather. Never poke, prod, or pop these bubbles, they will always go away on their own.